Radio Merit Badge
The Munsee District Jamboree-on-the-air will feature several JOTA radio station setups available at the Watchung Reservation Scout Area in Mountainside, NJ (adjacent to Trailside Nature Center). The event is open to Cub, Scout and Venture units from all districts. Each scout will have at least 5-10 minutes to chat with other scouts at other JOTA locations.
Radio merit badge requirements
Explain what radio is. Then discuss the following:
a. The differences between broadcast radio and hobby radio
b. The differences between broadcasting and two-way communications
c. Radio call signs and how they are used in broadcast radio and amateur radio
d. The phonetic alphabet and how it is used to communicate clearly
Do the following:
a. Sketch a diagram showing how radio waves travel locally and around the world.
b. Explain how the broadcast radio stations WWV and WWVH can be used to help determine what you will hear when you listen to a shortwave radio.
c. Explain the difference between a distant (DX) and a local station.
d. Discuss what the Federal Communications Commission (FCC) does and how it is different from the International Telecommunication Union.
Do the following:
a. Draw a chart of the electromagnetic spectrum covering 300 kilohertz (kHz) to 3,000 megahertz (MHz).
b. Label the MF, HF, VHF, UHF, and microwave portions of the spectrum on your diagram.
c. Locate on your chart at least eight radio services such as AM and FM commercial broadcast, citizens band (CB), television, amateur radio (at least four amateur radio bands), and public service (police and fire).
Explain how radio waves carry information. Include in your explanation: transceiver, transmitter, receiver, amplifier, and antenna.
Do the following:
a. Explain the differences between a block diagram and a schematic diagram.
b. Draw a block diagram for a radio station that includes a transceiver, amplifier, microphone, antenna, and feed line.
c. Discuss how information is sent when using amplitude modulation (AM), frequency modulation (FM), continuous wave (CW) Morse Code transmission, single sideband (SSB) transmission, and digital transmission.
d. Explain how NOAA Weather Radio (NWR) can alert you to danger.
e. Explain how cellular telephones work. Identify their benefits and limitations in an emergency.
Explain the safety precautions for working with radio gear, including the concept of grounding for direct current circuits, power outlets, and antenna systems.
Visit a radio installation (an amateur radio station, broadcast station, or public communications center, for example) approved in advance by your counselor. Discuss what types of equipment you saw in use, how it was used, what types of licenses are required to operate and maintain the equipment, and the purpose of the station.
Find out about three career opportunities in radio. Pick one and find out the education, training, and experience required for this profession. Discuss this with your counselor, and explain why this profession might interest you.
Do ONE of the following: (a OR b OR c OR d)
a. Amateur Radio
1. Tell why the FCC has an amateur radio service. Describe some of the activities that amateur radio operators can do on the air, once they have earned an amateur radio license.
2. Explain differences between the Technician, General, and Extra Class license requirements and privileges. Explain who administers amateur radio exams.
3. Explain at least five Q signals or amateur radio terms.
4. Explain how you would make an emergency call on voice or Morse code.
5. Explain the differences between handheld transceivers and home "base" transceivers. Explain the uses of mobile amateur radio transceivers and amateur radio repeaters.
6. Using proper call signs, Q signals, and abbreviations, carry on a 10-minute real or simulated amateur radio contact using voice, Morse code, or digital mode. (Licensed amateur radio operators may substitute five QSL cards as evidence of contacts with five amateur radio operators.) Properly log the real or simulated ham radio contact, and record the signal report.
b. Radio Broadcasting
1. Discuss with your counselor FCC broadcast regulations. Include power levels, frequencies, and the regulations for low-power stations.
2. Prepare a program schedule for radio station "KBSA" of exactly one-half hour, including music, news, commercials, and proper station identification. Record your program on audiotape or in a digital audio format using proper techniques.
3. Listen to and properly log 15 broadcast stations Determine the program format and target audience for five of these stations.
4. Explain to your counselor at least eight terms used in commercial broadcasting, such as segue, cut, fade, continuity, remote, Emergency Alert System, network, cue, dead air, PSA, and play list.
5. Discuss with your counselor alternative radio platforms such as internet streaming, satellite radio, and podcasts.
c. Shortwave and Medium-Wave Listening
1. Listen across several shortwave bands for four one-hour periods - at least one period during daylight hours and at least one period at night. Log the stations properly and locate them geographically on a map, globe, or web-based mapping service.
2. Listen to several medium-wave stations for two one-hour periods, one period during daylight hours and one period at night. Log the stations properly and locate them on a map, globe, or web-based mapping service.
3. Compare your daytime and nighttime shortwave logs; note the frequencies on which your selected stations were loudest during each session. Explain the differences in the signal strength from one period to the next.
4. Compare your medium-wave broadcast station logs and explain why some distant stations are heard at your location only during the night.
5. Demonstrate listening to a radio broadcast using a smartphone/cell phone. Include international broadcasts in your demonstration.
d. Amateur Radio Direction Finding
1. Describe amateur radio direction finding and explain why direction finding is important as both an activity and in competition.
2. Describe what frequencies and equipment are used for ARDF or fox hunting.
3. Build a simple directional antenna for either of the two frequencies used in ARDF.
4. Participate in a simple fox hunt using your antenna along with a provided receiver.
5. Show, on a map, how you located the "fox" using your receiver.
Radio Merit Badge Requirements Met by JOTA Participation
The following requirements can be completed during a typical JOTA event.
7) Visit a radio installation (an amateur radio station, broadcast station, or public communications center, for example) approved in advance by your counselor. Discuss what types of equipment you saw in use, how it was used, what types of licenses are required to operate and maintain the equipment, and the purpose of the station.
9a(6) Using proper call signs, Q signals, and abbreviations, carry on a 10-minute real or simulated radio contact using voice, Morse code, or digital mode. . . . Properly log the real or simulated ham radio contact and record the signal report.
- All radio operators must operate their station strictly in accordance with FCC regulations.
- Stations should try to contact each other by calling “CQ Jamboree” or “CQ JOTA” or by answering other stations sending this call.
- Any authorized amateur radio frequency may be used. It is suggested that the frequencies listed below be used, at least for a starting point. Once contact is established, you can move to another frequency to leave the calling frequency open for others.
- Any amateur mode of operation can be used such, as CW, SSB, PSK, SSTV, FM, and satellite. The more modes in operation, the more exciting the event will be for the Scouts.
- JOTA is not a contest. The idea is to contact other Scout stations and allow as many Scouts as possible to talk to other Scouts and learn about who they are and what they are doing. You might think about counting the Scouts on both sides of the QSO rather than the number of QSOs!